Amorim Industrial Solutions: Products



Home	Search	Contacts

Quick links

Browsing

Industry CorkRubber

Chemical Compatibility Chart

Download

(Due to this chart complexibility and size, it may take a few moments to download)

Information

For many of our products you can download a complete Material Data Sheet with specifications.

If you can't find a product with the specification that suits your needs, use the Contact Form asking what you need and we'll promptly help you find it.

Disclaimer

Amorim Industrial Solutions reserves the right to change product specifications at any time without notice or obligation.

Techseal ^™

The following products are available for this application:

CR-75 (214)

Hypalon/cork blend, medium-firm, with good heat, ozone, and oil resistance. Used for OE, oil and transmission pan gaskets.

HC-50 (237)

Cork/nitrile blend with high compressibility and good oil resistance. Offers low swell in fuels and oils. Excellent choice where bolt pressures are low.

HC-60 (238)

A Nitrile Cork Rubber designed to give excellent sealing properties at medium bolt pressures in Mineral Oils with a temperature range of -10 ºC to 110 ºC

HC-80 (239)

Cork/nitrile blend with low compressibility and good oil resistance. Use with high bolt pressure. Recommended in automotive, fuel pump and meter applications.

NC-60 (211)

Cork/neoprene blend with medium compressibility and good oil resistance. Used in air or refrigeration compressors among other applications.

NC-80 (212)

Cork/neoprene rubber blend, a firm material with high tensile and tear resistance, low compression set. Excellant heat resistance and moderate swell in fuels and oils.

NCA-45 (208)

Cork/synthetic rubber blend with medium oil resistance. Used in most automotive and sealing applications including valve covers, oil pans and transmission pans.

NCA-50

Cork/synthetic rubber blend with medium compressibility and oil resistance. A good general purpose sealing material offering good performance in a wide variety of applications.

SG-601

Hypalon/cork blend. Offers high swell characterístics to a medium compressible material. Used in OEM transmission pan applications and other soft gasket areas where torque loss could cause an average sealing material to fail .

SG-625

Vamac/cork blend. Very soft and highly compressible with exceptional heat and low temperature resistance. Used for sealing in low flange pressure applications. Excellent choice for use with compression limiters.

SG-630 (262)

A firm, low to moderately compressible cork-rubber material with exceptional heat and low temperature resistance.

SP-50

Nitrile/cork sponge blend with good oil resistance. Very soft material. Conforms well where flange irregularaties and low load pressures are present.

SP-51 (267)

Hypalon/cork sponge blend with good heat and oil resistance. Its soft sealing characteristics provide good sealing in environments requiring temperature, fluid and atmospheric exposure resistance.

SP-52 (268)

Neoprene/cork sponge blend with moderate oil resistance. Used for oil sealing in low torque applications. Used for die ejection, as well as cushioning for furniture and insulation on windows and doors.

SP-74

SBR/cork sponge blend that is highly compressible. Used for die ejection, noise reduction, matting, cushioning, fatigue and compession mats under equipment and furniture.

Material Data Sheets

We provide Material Data Sheets for all our products. Additional informations on specific tests and properties are available on each MDS. To access available data sheets for a specific product, click on the listed grade. A PDF version of each MDS is also available.